Get one in your hands first
Tell us which pillows you’d like to see, rough quantities and where you sell, and we’ll send samples. Or bring your own idea — we can tool a design that’s yours alone.
本站也有中文版。
看中文版Pouring, foaming, trimming, sewing, packing and shipping all happen in one plant. Three foaming lines, about 150,000 pieces a month.

Here is the line in production order. Every step happens in this one plant.

The two components are poured into the molds at the day’s formula ratio and cure as the carousel turns. We run 3 dual-formula foaming machines with 200 kg tanks, putting 85 to 90 sets of molds and 6 formulas on the line each day.

Every core out of the mold is trimmed by hand and inspected as it is trimmed. This is a 100% inspection; rejects are pulled on the spot.

Inspected cores wait on racks for their covers. 300 racks at 200 × 80 cm hold 30,000 pillows or 50,000 lumbar supports and seat cushions.

Fabric is cut to pattern and four-thread overlocked. Finished covers are inspected on their own before they meet a core.

Pillows are covered on the packing line, then roll-packed or boxed flat. 2 automatic roll-packing machines and 12 packers handle 3,500 sets a day, checking every cover again for marks, loose threads and creases.

Finished goods are stacked by order in a 1,500 m² warehouse that holds 50,000 to 80,000 pieces. Every shipment is AQL-sampled before it leaves.
These figures come from the plant’s equipment and capacity list.
| Machine | Count | Use and specs |
|---|---|---|
| Dual-formula PU foaming machine | 3 | 200 kg tank each |
| 10 m automatic carousel foaming line | 1 | ~80,000 pieces a month |
| Half-carousel foaming line | 2 | ~35,000 pieces a month each |
| Automatic foam press | 1 | |
| Jack four-thread overlock machine | 20 | Cover overlocking and sewing |
| Automatic roll-packing machine | 2 | Roll-packed shipping |
| Racks | 300 | 200 × 80 cm; hold 30,000 pillows or 50,000 lumbar supports and seat cushions |
| Temperature and humidity test chamber | 1 | Roll-pack rebound and aging tests |
From the client’s approved pre-production sample to the AQL check before shipping.
The client approves a pre-production sample; the first article and the bulk order are both checked against it.
Process requirements and watch-outs are agreed before work starts.
The formula is tuned for the order and the first article is checked against the approved sample and logged.
Cores are sorted right after demolding; anything doubtful goes no further.
QC patrols the foaming line; every batch is weighed by one person and checked and signed by another.
Each core is inspected as it is trimmed.
100% inspection
Each cover is checked for marks, loose threads and creases as it goes on.
100% inspection
QC patrols the packing line.
Every shipment is AQL-sampled. You are welcome to inspect on the line.

The foaming machines are calibrated daily. Every batch is weighed by one person and checked and signed by another. First articles are checked against the pre-production sample the client approved.




Tell us which pillows you’d like to see, rough quantities and where you sell, and we’ll send samples. Or bring your own idea — we can tool a design that’s yours alone.